Level 1

100 (min.)

7.0

0.895

The penetrants remain stable without precipitation or separation.

20% (min.)

Clear, mobile yellow-green liquids in daylight which appear brilliant yellow under UVA of 365nm peak wavelength (black light).

The penetrants are stable solutions of solvents, surfactants, non-ionic emulsifying agents and fluorescent dyes. They contain no added sulphur, halogen or inorganic compounds and are essentially ash free on ignition

Level 1

7.0

0.895

Level 2

8.0

0.90

Level 3

9.0

0.915

Level 4

10.7

0.965

-

Non-flammable

5.9

0.99

Infinite

Level 2

100 (min.)

5.0

0.925

The penetrants remain stable without precipitation or separation.

Post removable Britemor penetrants do not mix with water.

Clear, mobile yellow-green liquids in daylight which appear brilliant yellow under UVA of 365nm peak wavelength (black light).

The penetrants are stable solutions of solvents, esters, surfactants and fluorescent dyes. They contain no added sulphur, halogen or inorganic compounds and are essentially ash free on ignition

Level 3

6.5

0.94

Level 3

5.5

0.98

Level 4

7.5

0.98

hydrophilic remover (conc.)

100 (min.)

1.0

15.0

The penetrants remain stable without precipitation or separation.

Infinite

Clear red viscous liquid

The hydrophilic remover concentrates are blends of non-ionic detergents, coupling agents, corrosion inhibitors and dyes.
They contain no added sulphur or halogen.

hydrophilic remover (conc.)

0.98

Clear blue viscous liquid

Lipophilic emulsifier

100 (min.)

24.0

0.93

30%

Clear orange-yellow liquid

Blends of non-ionic and anionic surfactants, coupling agents and hydrocarbon solvents.
They contain added sulphur or halogen.

Lipophilic emulsifier

61.0

0.97

Clear red liquid which fluoresces orange under UVA.

Solvent remover

25 (Abel)

-

0.75

Immiscible

Clear, colorless, volatile mobile liquids

Hydrocarbon distillate containing <0.1% aromatics. Non volatile residue <50ppm.

Solvent remover

12 (Abel)

-

0.93

Infinite

Alcohol based solvent t/v = 500ppm Non volatile residue <50ppm.

Solvent remover

Non-flammable

-

1.32

Immiscible

Chlorinated hydrocarbon having a non volatile residue of <50ppm.

Dry powder developer

Non-flammable

-

100-140 g/l (bulk)

-

-

Free flowing white fluffy powder, particle size range from sub-micron to 25 micron.

Blends of amorphous, inert white powders with high development capacity. ASBESTOS FREE.

Dry powder developer

Non-flammable

-

-

-

Liquid spray developer (Non. Aq.)

Flammable

-

1.40

% solids on filtration =2w/v

Before application, white solids in a clear liquid. After application - smooth even coatings where LD5 is almost invisible and LD2 (M) and LD3 appear as a translucent white film

Suspension of inert white powders in a volatile solvent, t/v =1000ppm.

Liquid spray developer

Flammable

-

0.90

% solids on filtration =16w/v

Suspension of inert white powders in a volatile alcohol based solvent.

Liquid spray developer

Non-flammable

-

1.29

% solids on filtration =10w/v

Suspension of inert white powders in a chlorinated hydrocarbon solvent.

Water suspendable developer

Non-flammable

-

-

Use at 70 g/litre in water

Off white powders. When prepared and ready for use WD1 is a suspension of white pigment in a clear liquid and WD2 is a clear solution

Blend of inorganic powders and wetting agents.

Water soluble developer

Applied as an aqueous mixture

-

-

Mix with water at a concentration of 60-200 g/litre

Blend of water soluble organic and inorganic compounds.

Suspension developer

45

-

1.1

LDW is to be used as supplied after shaking thoroughly

White powder in clear liquid

Inorganic white pigments suspended in an aqueous solution of 2-propanol (5%)